Basically, GM says they traced the problem down to two suppliers. They also investigated this issue three times until they could trace it. And the timeframe of the issues means now 2019-2021 and 2025 models were affected.
It's interesting, I follow a guy on YT Donslife. He has a 2021 GMC Sierra, same truck as mine, and has done a TON of mods to it. He also has a 2022 Escalade. The Escalade had the recall his truck didn't. I'm hearing rumors that this is mainly affecting US made trucks out of Fort Wayne. Mine was assembled in Mexico, his also I believe.Basically, GM says they traced the problem down to two suppliers. They also investigated this issue three times until they could trace it. And the timeframe of the issues means now 2019-2021 and 2025 models were affected.
Sorry, 2021-2024. I was a bit fast typing that.It's interesting, I follow a guy on YT Donslife. He has a 2021 GMC Sierra, same truck as mine, and has done a TON of mods to it. He also has a 2022 Escalade. The Escalade had the recall his truck didn't. I'm hearing rumors that this is mainly affecting US made trucks out of Fort Wayne. Mine was assembled in Mexico, his also I believe.
It's weird though, it seems they would want to make the oil change on all of the 6.2's. The Camaro and Vette recommended 0w40. If they don't recall all of them I can't see how they'll make the oil change requirement. They can issue a service bulletin to change the required oil but that won't get to everyone.
It's also possible not all of the recall notices have been sent out.
To clarify, are you saying it is mainly 2019-2021 and also 2025 or it's mainly 2022-2024?
I didn’t get the sense he was trading in the AT4X becuase of the 6.2 issue, rather that he decided he'd rather have the EV. But if you're right about his motivation then I agree its a bit of an over reactionThat is one heck of an overaction. Just enjoy your paid off truck and get the eventual fix when it comes out. An AT4X is quite the nice truck.
Was the engine also assembled in Mexico. My truck was assembled in Mexico but the engine and transmission are US builtI'm hearing rumors that this is mainly affecting US made trucks out of Fort Wayne. Mine was assembled in Mexico, his also I believe.
My truck was assembled in Mexico but the engine and transmission are US built
IIRC its on the Drivers Door sill sticker. I'll check next time I'm at my truckRemind me how to look that up, it doesn't seem to be in the VIN info when doing a lookup? Window sticker?
Or maybe on the decal under the hood?IIRC its on the Drivers Door sill sticker. I'll check next time I'm at my truck
Its not on this sticker. I thought it might come up when you scan the QR code but thats just the VIN, RPO's and the paint code. I'm almost positive I had this info when I bought the truck but can't remember where I found it.IIRC its on the Drivers Door sill sticker. I'll check next time I'm at my truck
Its not on this sticker. I thought it might come up when you scan the QR code but thats just the VIN, RPO's and the paint code. I'm almost positive I had this info when I bought the truck but can't remember where I found it.
You might be right. It's possible I'm misremembering something I read on the internet as actual documentation I had for my truck.The more I'm reading it seems like this might be a common misconception. Mexico does full engine and transmission assemblies along with final assembly of the vehicle. I keep reading that a lot of Mexican trucks have US built engines and transmissions but I can't find where anyone is finding that information.
Interesting that Don mentioned GM might be moving to a 3000 miles oil change interval on the L87Here's the best video yet on breaking down the recall with info currently available:
My truck has a build date of 2/21 ... so 1 month before the parts were bad. Sweet. Dodged that bullet back to only worrying about lifters.
The most interesting part of the video, the parts were machined in....St. Catherines, Ontario, Canada. So no issues at the other two locations Tonawanda, NY and Spring Hill, TN.
I wonder what the oil recommendation is going to be for 6.2's not included in the recall?
GM, and other manufacturers have done it too, swap to a thicker oil midlife for better protection value. His point about the exact same engines overseas where they're not worried about miles per gallon standards call for heavier oil.
He has a lot of opinions that’s for sure. I’ve asked him via email about some statements he has made and he backed off on them stating that was the way it used to be 10 years ago. He has a big following. I’m staying away. I worry it will only start a controversy if I don’t bow to his knowledge and I question his views. Kind of like challenging Scotty Kilmer.That's a good video. I'm curious about the people like myself withe same engine not recalled ...should we swap to 0w40 too? I wonder what the MPGs would look like after the swap.
It has been a while since I watched some of his content and I forgot that he has at times in his past worked directly with manufacturers to get oil recommendations. It's nice to hear someone say out loud what everyone has been thinking, the thinner oil isn't because it's the best protection for the engine it's to help them meet MPG, EPA & Cafe standards. I think there's a video in that @testerdahl.
GM, and other manufacturers have done it too, swap to a thicker oil midlife for better protection value. His point about the exact same engines overseas where they're not worried about miles per gallon standards call for heavier oil.
I’ve learned that talking about oil is liking talking about politics or religion. No matter what you say, someone will have an opinion on it. And that opinion will vary. I remember doing an interview with Valvoline and there were hundreds of comments sharing their oil recommendation interval. Everything from 1k, 3k, 5k, 6500, 8k and 10k. Everyone had a different rationale and reason behind their intervals.Oh yeah, you know the videos that are coming. All the thin-oil haters are feeling vindicated now, so they'll use this situation to spread the gospel. You can see it in the comments of the Oil Geek's video. They are even slamming the "0W" part of it for some reason.
I'm betting you could interview a panel of experts from Amsoil and Mobil1 to Ford and Toyota presenting years of test data and someone will reply with, "But Scotty Kilmer said...."